Specifications
Features
CT clamp structure
Function
Current, leakage current, transformation ratio, higher harmonic current, phase, electric power, power, power factor of the High and low voltage lines
Output Method
Current sensing output
Jaw Size
Φ50mm
Secondary Development Display Window
46*30mm
Range
AC 0.0mA ~ 1200A
Resolution
AC 0.1mA
Accuracy
±1.0%FS (50Hz/60Hz ; 23℃±2℃) The wire is in the center of the jaw
Phase Error
≤3°(50Hz/60Hz ; 23℃±2℃)
Turn Ratio
4000 : 1
Reference Load
RL : 0～10A≤50Ω ; 0～100A≤5Ω ; 0～1200A≤0.5Ω
Weight
300g
Dimensions
L/T/H 87*37*262mm
Output Interface
10cm long, can be connected by opening the upper and lower covers
Electric field Interference
About 10mA when the external electric field 100A approaches 30mm
Wire position
The tested wire is at the center of the jaw
Current Frequency
10Hz – 100KHz(measured current frequency)
Line Voltage
AC 60kV and below line test (the telescopic insulation rod should be fully open)
Working Temperature
-25° C to +55°C
Medium Strength
AC3700V/rms (between iron core and shell)
